This gnome in a pumpkin stands approximately 3.5 inches tall and is suitable for all crocheters. I hope you enjoy this pattern, and if you post pictures, please credit appropriately & hashtag #laurajaworski/tag me @bugburrypond so I can share your creations.
You can find all of my free crochet patterns here.
Happy crocheting & happy fall! 🎃
Skill Level: Easy
Size:
This gnome stands approximately 3.5 inches tall.
Supplies:
Worsted weight yarn (tan, white, orange, brown)
4.0 mm hook
Safety eyes (5mm, or to your preference)
Needle for sewing
Polyester or other stuffing
Stitch marker, safety pin, or small piece of yarn to count rounds
Scissors
Glue (optional)
Abbreviations:
MC = Magic circle
St = Stitch
Sc = Single crochet stitch
Ss = Slip stitch
Rep = Repeat
2tog = Crochet two together, also known as decrease (invisible decrease preferred)
Ch1 = Chain one
F/o = Finish off
A note about the magic circle:
Also known as a magic loop or magic ring. If you prefer not to use a magic circle, simply create a slip knot, chain two, and begin by placing your first round of stitches into the first chain. Pull tight on your tail to close the gap and continue with the pattern as written. Once you have worked a few more rounds, weave your yarn tail back and forth on the underside to secure your piece and close any remaining gap.
A note about working in a spiral:
This little gnome is worked in a spiral which means that each round continues into the next without a slip stitch and chain.
Click here for The Pumpkin Pie Gnome Free Crochet Pattern 🎃
A note about counting stitches:
Using a stitch marker, safety pin, or small piece of yarn to mark the first stitch of each round will help you track your progress. Move the marker as you complete each round.
A note about BLO:
For the back loop only round, you will work all of your stitches into the back loop of each stitch. For all other rounds, work into both loops of each stitch.
A note about increasing and decreasing:
For an increase, crochet two stitches in the same stitch. For a decrease, crochet two stitches together, preferably using the invisible decrease method.
A note about reading the pattern:
Before beginning a pattern, it helps to read through the abbreviations list. If you need help with a technique, refer to a written or video tutorial, or keep a crochet book handy. Below is a round from the pattern, followed by a detailed description of the instructions.
Rnd 4: 2sc then 2sc in the next st, rep (24)
Beginning round four, add one single crochet into each of the next two stitches. Add two single crochet stitches in the following stitch. Repeat the pattern of one single crochet in each of the next two stitches followed by an increase until you reach the end of round four. There should be 24 stitches in your completed round.
A note about the invisible finish technique:
For the invisible finish technique, complete the last stitch of your pattern. Snip your yarn, leaving a tail long enough for sewing. Pull the loop on your hook, drawing the snipped yarn tail free. Next, thread the yarn tail onto your needle; skip the next stitch and bring your yarn tail through both loops of the following stitch. Bring your yarn tail through the back loop of the last stitch of your final crochet round, pulling until you’ve created a v that is comparable in size to the rest of your stitches. Weave your yarn tail on the backside of your piece to secure.
Now let’s get started!
Head & Body (beginning at the top, with tan yarn):
Rnd 1: MC with 6sc (6)
Rnd 2: 2sc in each st (12)
Rnd 3: 1sc then 2sc in the next st, rep (18)
Rnd 4-6: 1sc in each st (18)
Rnd 7: 1sc then 2tog, rep (12)
Add your safety eyes on the front of the head, between rounds 5 & 6 with 2 stitches between. Begin stuffing the head; you can continue stuffing as you go.
Rnd 8: 2tog 6 times (6)
Change to brown yarn.
Rnd 9: 2sc in each st (12)
Rnd 10: 1sc then 2sc in the next st, rep (18)
Rnd 11: 2sc then 2sc in the next st, rep (24)
Rnd 12-14: 1sc in each st (24)
Rnd 15: 2sc then 2tog, rep (18)
Rnd 16: 1sc then 2tog, rep (12)
Stuff the body.
Rnd 17: BLO 2tog 6 times (6)
Snip your yarn, leaving a long tail for sewing. Pull your tail free, then weave your tail around the front loops of the six remaining stitches and pull to close. Weave your yarn back and forth or knot to secure, then hide the yarn tail inside the body, pulling up slightly so your gnome sits flat.
Beard (with white yarn):
Row 1: Ch2, 2sc in the back bump of the first ch (2)
Row 2: Ch1 & turn, 2sc in the first st, sc (3)
Row 3: Ch1 & turn, sc, 2sc in the next st, sc (4)
Row 4: Ch1 & turn, sc, 2sc in the next st, 2sc (5)
Row 5: Ch1 & turn, 2sc, 2sc in the next st, 2sc (6)
Ch1 & do not snip your work.
You will now work a border around the beard (see photos):
Working down the left (rough) side of your beard: 5sc
Working into the point of your beard: sc, ch1, sc
Working up the right (rough) side of your beard: 5sc
Working along the top of your beard (row 5): *sc, ch1, sc* in the first st, 4sc, *sc, ch1, sc* in the last st.
Snip your yarn and f/o using the invisible finish technique. Note: when completing the invisible finish technique for the beard, skip over the ch1 completed at the end of row 5 and work into the sc two stitches over. Weave your yarn tails loosely on the back of your beard to cover any noticeable gaps.
Adding the nose:
To add the nose, cut a length of tan yarn and thread it on your needle. Wrap the yarn securely around the top middle stitches of the beard (along the last row of the border), working from back to front and across until you have created the width of nose you would like (see photos). Wrap the yarn across the length of the nose once more, continuing until the desired shape and size has been achieved. Weave your yarn tails on the back of your beard to secure.
Pumpkin Suit (beginning at the bottom, with orange yarn):
Rnd 1: MC with 6sc (6)
Rnd 2: 2sc in each st (12)
Rnd 3: 1sc then 2sc in the next st, rep (18)
Rnd 4: 2sc then 2sc in the next st, rep (24)
Rnd 5: 3sc then 2sc in the next st, rep (30)
Rnd 6-8: 1sc in each st (30)
Rnd 9: 3sc then 2tog, rep (24)
Rnd 10: 2sc then 2tog, rep (18)
Snip your yarn & f/o using the invisible finish technique.
Pumpkin Hat (beginning at the top, with orange yarn):
Rnd 1: MC with 6sc (6)
Rnd 2: 2sc in each st (12)
Rnd 3: 1sc then 2sc in the next st, rep (18)
Rnd 4: *8sc, 2sc in the next st* rep (20)
Rnd 5-7: 1sc in each st (20)
Snip your yarn & f/o using the invisible finish technique.
Pumpkin Stem (with brown yarn):
Ch4, ss in 2nd ch from hook, ss to end of row (3)
F/o, leaving a tail long enough for sewing.
Finishing Your Gnome:
Attaching the beard:
Stitch or carefully hot glue the beard to your gnome, lining the nose up directly between & underneath the eyes.
Attaching the stem to the hat:
Thread the two yarn tails and pull them firmly through the top center of your hat. Tie the tails together on the underside and weave them in to secure.
Adding your gnome to the pumpkin:
Gently squeeze your gnome into the pumpkin suit, lining the back of the pumpkin suit up with the back of the gnome. There should be a little wiggle room to position the gnome properly once he’s in the suit. Add the pumpkin hat, lining the back of the hat up with the back of the gnome. Finger block the stem and overall shape of your gnome.
Click here for all of my free crochet patterns 🎃
And now you’re done! I hope you enjoy this little gnome in a pumpkin & if you post pictures, please hashtag #laurajaworski & tag me @bugburrypond so I can see & share your work! You can find me @bugburrypond on Instagram, Facebook, & Pinterest.
If you have any questions or comments, please feel free to contact me.
Happy crocheting and have a beautiful day 💕
Laura
Please do not post this pattern on another site without written permission.
If you share this pattern, please credit appropriately and link back to the original post.
You may sell completed items made using my free crochet patterns provided you credit me as the designer and provide a link to my website. Alteration of my crochet patterns is strictly prohibited.
Copyright © 2022 Laura Jaworski, The Gnome in a Pumpkin Free Crochet Pattern.
All Rights Reserved.
“Inhale possibility, exhale creativity.” ~ Laura Jaworski
